The current draw with the LED display off is 8mA (no USB device connected).If the dual voltmeter is wired as per our recommendation, the LED display should only be active when the ignition is on, so the only residual current draw applicable is 8mA when the USB is not being used. The current draw with the LED display on (no USB device connected) is 13.8mA. Please make sure that the hole where your cig plug goes matches the sizes of our product to ensure it fits properly. The Lightforce Dual Voltmeter will fit most cig plug holes, once the cig plug has been removed. Please ensure fuses are utilised as depicted in the diagram. USB Fast Charge output 3.0 Amps at 5.1 volts, always powered from the Auxiliary Battery.The simple “plastic nut” style mounting system makes installation easy. The dust cover can be completely removed during installation if not required.A dust cover provides added durability when mounting in vulnerable locations.The illumination is only active when power is delivered from the Main Battery input.The lower LEDs display the Auxiliary Battery voltage Versatile module for monitoring electrical conditions in your car, 4WD, or boat - Dual battery 10-60VDC voltmeters - Multiple mounts included - Additional.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |